Panasonic Attune II Headset Registration (Pairing)

Created by Josh Doten, Modified on Wed, Jun 11 at 12:05 PM by Josh Doten

Headsets cannot be in use when registering new headsets.

Touch the Wrench Icon (setting button) on the touch panel.
Try skipping the password entry by just hitting login. If it doesn't let you, Try Password1.
Touch [Headsets]
Touch [ID Registration]
Touch [Start]
Touch [Yes]
Power off the headset, then power it back on while holding [T1] and [T2] Buttons.
1. The Headset starts up in ID registration mode. The “ID Registration Mode” voice prompt will be heard from the earphone, and the power indicator will blink orange
Press the [T1] Button on the headset.
1. The Headset searches for a Center Module that is in ID registration mode.
2. The “Connecting center module A” voice prompt will be heard from the earphone, and the lane indicator will blink orange.
3. When ID registration has been completed successfully, the “Registration complete” voice prompt will be heard from the earphone, and then a voice prompt for the number of the registered Headset will be heard. The power indicator and the lane indicator now stop blinking, and light up.
Touch [Stop].
1. Headset LED changes from Orange to Green.